• Application
  • Shock Control
  • Movement Control
  • Safety Products
  • Vibration Control
  • Technology
  • Calculation
  • E-Catalog
  • Contact
  • All Products

    Shock absorber

    This chart is a typical shock absorber structure. When the impact head is stimulated by an external force, it will drive the piston rod to push the piston to squeeze the hydraulic oil in the inner tube. After the hydraulic oil is pressed, the specially designed oil drain will be applied from the inner tube. The holes flow out and also flow into the accumulator system. During the flow of the hydraulic fluid, the damper produces a curved damping effect that smoothly decelerates linearly until it stops. At this time, the external kinetic energy has been converted into the thermal energy of the buffer, and then the heat is dissipated into the air. Such a design can achieve energy circulation. When the external force disappears, the return spring returns the piston rod to the starting position, and it will wait for the next action. According to this principle, the shock absorber will be able to stop the moving object smoothly and effectively.

    Impact cap
    impact head
    Piston rod
    Oil seal
    Bearing
    Pressure accumulating cotton
    Piston
    Oil drain hole
    Inner tube
    Outer tube
    Check valve
    Return spring
    Hydraulic oil
    Adjustment bolt
    Adjustment sleeve
    Adjustment knob

    If you are not sure about the product you need, you may use the “calculating formula” to look up the products you need.